| |
| |
GUTSELEKTRODEN |
|
POINTED GUTSELEKTRODEN |
Our Pointed gouging rods are designed especialy for the air carbon arc
metal removal process, wich melts metal with an electric arc, then blows
it away with a jet of ordinary shop compressed air. Our gouging rods
contain a precisely formulated blend of carbon and graphite that produces
the most efficient metal removal performance. They offer excellent arc
stability, superior metal removal rates, resistance to breakage, heat and
oxidation, uniform diameter and clean slag free grooves.
Diameter in inches |
Diameter in mm |
5/32" x 12" |
4,0 x 305 |
3/16" x 12" |
5,0 x 305 |
1/4" x 12" |
6,5 x 305 |
5/16" x 12" |
8,0 x 305 |
3/8" x 12" |
10,0 x 305 |
1/2" x 14" |
13,0 x 355 |
|
JOINTED GUTSELEKTRODEN |
Our Jointed gouging rods are designed especialy for the air carbon arc
metal removal process, wich melts metal with an electric arc, then blows
it away with a jet of ordinary shop compressed air. Our gouging rods
contain a precisely formulated blend of carbon and graphite that produces
the most efficient metal removal performance. They offer excellent arc
stability, superior metal removal rates, resistance to breakage, heat and
oxidation, uniform diameter and clean slag free grooves.
Diameter in inches |
Diameter in mm |
5/16" x 14" |
8,0 x 355 |
3/8" x 14" |
10,0 x 355 |
3/8" x 17" |
10,0 x 430 |
7/16" x 14" |
11,0 x 355 |
1/2" x 14" |
13,0 x 355 |
1/2" x 17" |
13,0 x 430 |
5/8" x 14" |
16,0 x 355 |
5/8" x 17" |
16,0 x 430 |
3/4" x 14" |
19,0 x 355 |
3/4" x 17" |
19,0 x 430 |
1" x 17" |
25,0 x 430 |
|
|
|
PLATTE GUTSELEKTRODEN |
Our Flat or rectangular gouging rods are designed especialy for the air
carbon arc metal removal process, wich melts metal with an electric arc,
then blows it away with a jet of ordinary shop compressed air. Our
gouging rods contain a precisely formulated blend of carbon and graphite
that produces the most efficient metal removal performance. They offer
excellent arc stability, superior metal removal rates, resistance to
breakage, heat and oxidation, uniform diameter and clean slag free
grooves.
|
|
|
Diameter in inches |
Diameter in mm |
3/8" x 3/16" x 12" |
10,0 x 5,0 x 305 |
9/16" x 3/16" x 12" |
15,0 x 5,0 x 305 |
9/16" x 3/16" x 14" |
15,0 x 5,0 x 355 |
3/4" x 3/16" x 12" |
19,0 x 5,0 x 305 |
K-4 GUTSTANG MET MONOKABEL |
The K-4 accepts both round and flat gouging carbon rods, ranging in size
from 4,0 up to 13,0mm round and 15mm flat. The monocable is available in
lengths of 2 and 3 meter. The K-4 is rated to 1000 Amps, It uses
compressed air at 80 to 100 psi and a flow rate of 30-35 cfm.
Type |
Capaciteit |
Max. elektroden |
K-4 |
600 Amp. |
10mm (3/8") |
|
|
|
FLAIR GUTSTANGEN |
|
De Flair is een gutstang met een draaibare spuitnippel en gebolde
elektroden klemming. Door hoogwaardige produktietechnieken en
materialen ontstaat optimale elektrische geleiding en ondervindt de
toevoer van lucht door het lichaam minimale weerstand. De combinatie
met de monokabel maakt de Flair eenvoudig te hanteren en breed
inzetbaar. De monokabel wordt eenvoudig aangesloten op de Flair
gutstang enerzijds en de stroombron en perslucht anderzijds.
Type |
Capaciteit |
Max. elektroden |
Flair 2 |
600 Amp. |
10mm (3/8") |
Flair 600 |
600 Amp. |
10mm (3/8") |
Flair 1600 |
1600 Amp. |
19mm (3/4") |
FLAIR MONOKABELS |
|
Gutsen met de monokabel is een zeer efficiënte wijze om de stroom en
luchttoevoer in één enkele kabel te kunnen realiseren. De monokabel
is verkrijgbaar voor de Flair 600 en 1600.
Type |
Omschrijving |
Flair 600 |
Monokabel voor gutstang Flair 600,
roterend |
Flair 1600 |
Monokabel voor gutstang Flair 1600, roterend |
Flair 1600 |
Monokabel voor gutstang Flair 1600, met stop |
|
|
|
| |
| |
| |
|
|
| |
|
|
