| |
OK Tubrod 15.00
FCAW
Type Basic
OK Tubrod 15.00 is a flux-cored wire which deposits very low-hydrogen quality weld metal. Diameters 1.0 and 1.2 mm are available for positional welding. The slag cover is thin and easily remelted. Shielding gas CO2 or Ar + 20% CO2. OK Tubrod 15.00 is designed for general fabrication where the risk of hydrogen-induced cracking is to be avoided.
Welding current, A
DC-
|
      |
| Classifications | Approvals | Typical all weld metal composition | Typical properties all weld metal | | SFA/AWS A5.20 | | E71T-5, E71T-5M | | EN 758 | | T 42 3 B M 2 H5, T 42 3 B C 2 H5 |
| | CL | 0485 | |
| DB | 42.039.12 | |
| DNV | IIIYMS | |
| DS | T 42 2 B M 2 H5 | |
| GL | 3YH10S | |
| LR | 3S 3YS H15 | |
| RINA | 3Y S H5 | |
| RINA | 3Y S | |
| VdTÜV | 02181 | |
| CE | EN 13479 | |
| | C | 0,06 | | Si | 0,6 | | Mn | 1,4 | | P | 0,025 | | S | 0,025 | | Cr | ³0,2 | | Ni | ³0,2 | | Mo | ³0,1 | | V | ³0,05 | | Nb | ³0,05 | | Cu | ³0,1 | | Al | ³0,05 | | Ti | ³0,05 | | Pb | ³0,1 | | As | ³0,1 | | Sb | ³0,1 | | B | | | N | 0,01 |
| Yield stress, MPa
470
Tensile strength, MPa
550
Elongation, %
30
Elongation, %
30
| Charpy V | | Test temps, °C | Impact values, J | | -20 | 120 | | -30 | 120 |
|
| Diameter, mm | 1,0 | 1,2 | 1,4 | 1,6 | 2,0 | 2,4 | | Arc voltage, V | 14-30 | 16-32 | 16-32 | 24-34 | 24-34 | 26-36 | | Welding current, A | 100-230 | 120-300 | 130-350 | 140-400 | 200-450 | 300-500 |
|
|